Optimal Design of Sun Gear for Robots: A Comprehensive Static and Dynamic Analysis

Facebook
Twitter
LinkedIn

I. Introduction to Gear Significance in Robotics

In robotics, the sun-planet gear mechanism is of utmost importance for achieving accurate motion. This paper centers around the study of sun gear and its combination with planet gears in robotic applications.

Fig. 1 Preliminary model of the Sun-Planet Gear Mechanism

 

II. Gear Redesign Process and Parameters

The research initiates with the redesign of the sun-planet gear mechanism. The key factors considered are the pressure angle and face width. Through modifying these parameters, a novel gear set is developed. For example, increasing the pressure angle from 14.5° to 20° and making appropriate adjustments to the face width and internal bore. This redesign is intended to boost the performance of the gear system.
Table 1 Redesigned gear parameters

 

III. Performance Evaluation via Analyses

A. Mesh Independence Analysis

To assess the redesigned gears, a variety of analyses are conducted using ANSYS 2021 R1. In the mesh independence study, diverse mesh element sizes are examined. It is determined that a 2.5 mm mesh size is optimal as the natural frequency of the assembly exhibits minimal variation beneath this size, guaranteeing the precision of subsequent analyses.
Fig. 5 Meshed model
 

B. Static Structural Analysis

The static structural analysis discloses significant details. When a 500 N load is applied to the sun gear’s tooth, the maximum equivalent von-misses stress on the planetary gear is 20.45 MPa, and the total deformation of the planet gear tooth is merely 0.000211 mm. For the sun shaft under the same load, the maximum equivalent stress is 112.79 MPa with a safety factor of 15.
Fig. 8 Total deformation of the tooth in static structural analysis

 

C. Modal Analysis

Modal analysis is also executed. For the redesigned planetary gear crafted from 20CrNi2Mo alloy steel, the fundamental mode exerts a substantial influence on the system structure. The natural frequencies of different modes display specific distribution traits.
Table 8 Natural Frequency comparison between 20CrNi2Mo and Titanium alloy

 

IV. Material Comparison and Selection

When contrasted with titanium alloy, 20CrNi2Mo alloy steel is more fitting for robotic applications because of its superior machinability and wear resistance. In contrast, titanium alloy is favored in applications such as wind turbines due to its high strength and capacity to reduce weight and stress. And for BNC, focus on the OEM parts, sun gear with both iron or steel material will have the best quality.
 

V. Conclusion and Implications

In summary, this research offers valuable understandings of the static and dynamic responses of the sun-planet gear mechanism in robotics. It facilitates grasping the impacts of gear parameter alterations and material selection, which is advantageous for optimizing the design of gear systems in robotic applications and enhancing the overall performance of robots.


Customize the Gear, could contact us:

Try BNC Now!

All uploads are secure and confidential

*Refer to Static and dynamic analysis of a sun-planet gear mechanism in robotic applications

Still hungry? Here’s more

en_USEnglish